 Structural design of concrete and steel structures for approval in Dubai Municipality
 Responsible for the preparation of structural drawings and design
 Providing solutions on structural related matters at the site
 Perform site coordination to ensure that the approved structural design will be implemented
in the site
 Responsible for the review and checks of structural design and drawings prepared by an
contracting company
 Discussion with the contracting company regarding the submitted structural design and
drawings.
 Responsible for design checks both within the civil discipline and interdisciplinary (electrical,
piping, HVAC and fire fighting)
 Using design codes as per Scope of Work such as ACI, AISC, ASTM, Eurocodes, BS Codes,
IBC2009 and ASCE7-05, and Abu Dhabi Distribution Company Standards and Technical
Specifications.
 Projects:
 Steel Warehouse, Jebel Ali
 Aluminum Mullion supporting cladding for Building
 G+3+R Commercial Buildings
 G+4 Commercial Buildings
 G+7 Labour Camp, Jebel Ali
 G+12+R Commercial Building (structural revisions)
 Residential Villas

 Providing solutions on structural related matters at the site
 Perform site coordination to ensure that the approved structural design will be implemented
in the site
 Responsible for the review and checks of structural design and drawings prepared by an
engineering design company
 Discussion with the consultant regarding the submitted structural design and drawings.
 Responsible for design checks both within the civil discipline and interdisciplinary (electrical,
piping, HVAC and fire fighting)
 Responsible for the preparation of structural drawings, design and BOQ for other projects
such as light pole foundation, and Overhead Transmission Line cable support foundation
 Coordination with the geotechnical engineer related to foundation design, most especially
those structures critical for settlement
 Providing solutions on structural related matters at the site
 Using design codes as per Scope of Work such as ACI, AISC, ASTM, Eurocodes, BS Codes,
IBC2009 and ASCE7-05, and Abu Dhabi Distribution Company Standards and Technical
Specifications.
 On-going projects:
 Hangar (Aluminum Structure)
 Warehouses (steel structures)
 Loading Ramps
 Low-rise buildings
 Water tank towers

 Responsible for site coordination to ensure that approved design has been implemented in site construction
 Providing solutions on structural related matters at the site
 Responsible for design checks both within the civil discipline and interdisciplinary (process,
piping, electrical and instrumentation)
 Responsible for the preparation of structural modelling, analysis and design using
STAAD.Pro, including structural calculation reports and design review for concrete and steel
structures (Rolled Shapes).
 Responsible for the preparation of complete civil work pack (structural drawings, BBS and
BOQ)
 Coordination with the geotechnical engineer related to foundation design, most especially
those structures critical for settlement
 Prepare project related specifications
 Providing solutions on structural related matters at the site
 Using design codes as per Scope of Work such as Eurocodes, Shell DEP Specifications,
IBC2009 and ASCE7-05, and other related British Standards (BS 8666:2005 for BBS, BS
3692:2001 for bolts and nuts specification, etc.) and the AISC Manual of Steel Construction.
 Prepared and completed the following designs/design review:
 Pile and pile cap design for extension manifolds in MJ-E20, ASP2
 Pipe sleepers, pipe supports, T-posts, including foundation design in MJ-E20 ASP2
 Pipe sleepers for new flare stack in DS2
 Design review of Flare Stack Design submitted by the vendor (DS2)
 Design review for equipment vessels foundations, sub-station foundations, gas
turbines, etc.
 Rig pathway slab for ASP3 projects including design review of drilling cellar, rig
culverts, flow line culverts and work-over unit slab
 Guard tower
 Pipe supports for various tie-ins in DS2, CPF and TGRS.

 Perform site inspection before design and construction will proceed
 Perform site supervision for US military projects in Leatherneck Camp, Helmand, Afghanistan
 Providing solutions on structural related matters at the site
 Responsible for the preparation of structural modelling, analysis and design including
structural calculation reports and design review for concrete and steel structures (Rolled
Shapes, Built-up Shapes and Cold-Formed Light Gage Shapes)
 Using design codes as per Scope of Work such as IBC2009 and ASCE7-05, British Standards
(BS8110, BS5950, BS6399 & BS5400), ACI-318, AISC, ASTM, AISI, ASCE, UBC & IBC
 Prepares structural design drawings
 Supervises construction works in Military Base, Helmand, Afghanistan
 Prepared and completed the following design using LGS and structural steel (with concrete
foundation):
 Aluminum Structures
 Dutch Barn for Military projects in Military Base, Helmand, Afghanistan
 Various Pre-engineered Buildings (PEB) as military accommodations
 Observation Towers
 Various sheds
 25-m long Warehouses using LGS
 Boathouses in Kenya, Liberia and Togo
 Schools in Ghana and Togo
 Clinics in Liberia and Togo
 Residential villas and medium rise apartment in Mozambique

 Perform site inspection prior to design and construction activities
 Conduct site inspection/supervision to ensure that the structural design approved by Dubai
Municipality has been implemented in site construction
 Approval of structural detailing in the site prior to inspection by the Dubai Municipality
engineers
 Providing solutions on structural related matters at the site
 Responsible for the preparation of structural modelling, analysis and design including
structural calculation reports and design review for concrete and steel structures
 Using design codes such as BS8110, BS5950, BS6399 & BS5400
 Conduct site supervision from time to time
 Secure the approval of drawings and structural calculation from Dubai Municipality ready
for construction in the site
 Prepared and completed the following design:
 Various Villas for local residents (both new and additional floors)  Various Mosques
 Solutions to pre-cast slabs for 4-storey commercial buildings
 Various steel warehouses
 Warehouses and Villas using Insulated Concrete Forms (ICF) technology

 Responsible for the preparation of structural modelling and analysis including structural calculation reports for concrete and steel structures
 Using design codes as per Scope of Work such as IBC2009 and ASCE7-05, British Standards (BS8110, BS5950, BS6399 & BS5400), ACI-318, AISC, ASTM, AISI, ASCE, UBC & IBC
 Prepares structural design drawings
 Conduct research activities
 Committee member, International Trainings conducted by ACECOMS (both linear and non-
linear modelling and analysis of different structures including high-rise structures)
 Editor-in-Chief, ACECOMS Magazine
 Prepared and completed the following modelling and analysis:
 
Location Position Inclusive Date : Responsibilities
Company
:
Pangasinan State University College of Engineering and Technology
Urdaneta City, Pangasinan, Philippines
Instructor
June 2001 - Oct. 2008 (with 2 years study leave)
 Modelling and analysis of Masonry Structures (client: Government of Pakistan)
 Modelling and analysis of proposed rehabilitation of GSIS Building in the Philippines
affected by 1990 earthquake.
 Modelling and Analysis of Tall Stack Structures in Thailand (including inputs for
viscous damper design)

 Perform site inspection prior to design and construction activities
 Conduct site inspection/supervision to ensure that the structural design approved by
Municipality has been implemented in site construction
 Providing solutions on structural related matters at the site
 Responsible for the preparation of structural modeling, analysis and design including
structural calculation reports and design review for concrete and steel structures
 Providing solutions on structural related matters at the site
 Using local design code (National Structural Code of the Philippines)
 Prepares structural design drawings
 Conduct site supervision from time to time
 Secure the approval of drawings and structural calculation from Municipality ready for
construction in the site
 Prepared and completed the following design:
: 6 Arzadon, Mayombo, Dagupan City, Pangasinan, Philippines Position : Freelance Civil/Structural Engineer
 Various residential houses up to three-story structure
Various steel warehouses 4th story commercial building

Major in Structural Engineering

Major in Structural Engineering