ARISTOTLE H. TAN

Residential Address: Flat 302, Al Owais Building, 29a st. Al Murraqabat Deira

Email Address          : aristan3a@gmail.com

Contact Number      : + 971 50 344 6732 / +971 58 104 7333

Language Spoken    : English, Tagalog

Qualification Summary:

A very skillful technical personnel with an extensive 14 years of experience both acquired in electronics manufacturing company and oil and gas industry. Accumulating various fields of expertise in manufacturing environment, such PLC programming & control system, DCS, electro pneumatics and hydraulic systems Robotics and automated control processes, instrumentation and installation of field equipment, equipment maintenance and machine repairs, acceptance test and calibration of new equipment, process troubleshooting such as sensors actuator and servo motors among others, AMO Assembly Maintain & Overhaul mechanical drilling tools oil and gas industry such completion tools, Fracking tools liner hanger among others, Maintain test and calibration perform reliability test on measuring probes such as directional, depth, temperature and gamma LWD logging tools among others, liaise with TPI third party inspector to achieve customer’s satisfaction, With an enthusiastic trainable spirit that empowers colleagues to strive for success and contribute value to the company.

Accomplishments:

• Certification for High pressure testing, Baker Hughes Inc. GE (BOT Baker Oil Tools)
• Safety committee member Baker Hughes Inc. GE (BOT)
• Promoted as Team leader, Systems Engineering Taiyo Yuden Phils. Inc.
• Promoted Technician Lvl. D
• Successfully improved machine and process efficiency, Electro-plating process by implementing preventive and maintenance scheduling. (Taiyo Yuden Phils. Inc.)
• Successfully established Auto-electrode production line from machine set up to evaluation to mass production, (Taiyo Yuden Phils Inc.)
• Successfully established thermo bonding process NPO4 production line from machine evaluation to mass production, (Taiyo Yuden Phils Inc.)

Acquired Strengths and Skills:

• Electro-mechanical tech I. LWD logging drilling tools, Baker Hughes Inc. GE INTeQ
• Mechanical Assemblymen IV Baker Hughes Inc. GE (BOT) completion tools liner hanger and packer system.
• Conversant with engineering drawings and blueprints parts list and assembly procedure
• Can interpret in electrical wiring and diagrams
• Can interpret electronic schematic diagram.
• Conversant with Electro-pneumatic control diagrams
• Background on P&ID schematics and symbols
• Experience in PLC programming using Keyence CS, Siemens S7, Omron CX and Hitachi
• Background knowledge on Safety PLC QUAD Log programming using FBD function block diagram
• Knowledgeable in AC-DC motor Control system, Servo motors and inverters
• Solid Background in automated process control and equipment
• Experience in trouble shooting drying furnace and firing conveyor, conduct temperature profiling and maintain conveyor system.
• Experience of field application EFMEA/ FMEA (Equipment Failure Mode Effect Analysis)
• Field application of DFMEA when designing parts modification and fabrication.
• Field application diagnostics using Root cause analysis, WHY 5Why analysis & Fishbone.
• Field application of TOC (Theory of constrains) through the use of GENBA KAIZEN (Continuous process improvement)
• Can work with ( MS EXCEL, MS WORD, SAP, Power point and BASIC

Autocad)

WORK EXPERIENCE:

BAKER HUGHES INC. GE (SINGAPORE)

Baker Hughes Inc. GE is one of the world’s leading service provider in pipeline services in oil and gas industry. It offer wide range of systems and technological solution in the industry. 273 JALAN AHMAD IBRAHIM SINGAPORE 629150

Electro-Mechanical Technician I (INTeQ) (AUG 2014 – OCT 2015)

JOB JUNCTION

• Evaluate and conduct maintenance on LWD drilling probe tools.
• Responsible for updating the system, identifying and classifying level of maintenance to perform on the tool.
• Responsible for re-works, maintenance, assembly and repairs, and quality control of tools prior for dispatch.
• Perform several reliability test and recalibration on instruments such as temp, directional, azimuth, depth and gamma among others.
• Provide insights and propose improvement to management
• Impart a harmonious and safe working environment to my coworkers
• Continuous cross training with other product line and other dept. to be able to support manpower if needed, and for personal growth.
• Updates MAPS tracking systems for tools status, running hours and location.

Mechanical Assemblymen IV (BOT) (FEB 2011 – AUG 2014)

JOB FUNCTION

• AMO Assembles Maintain and Overhaul mechanical drilling tools as specified in Engr’n in drawing or tech unit.
• Prepare EBOM parts list needed during assembly
• Maintain and secure all tools and equipment are in good condition, work area are keep clean and safe from all hazards.
• Operate testing equipment in compliance with engineering specification and HS&E safety standards
• Test tools as per Customers and/or tech Unit specifications and limits
• Prepare documentation, test charts checklist and liaise with TPI’s/clients on other documents they need deem valid or classified.
• Conduct final checking and quality assurance of all tools prior for dispatch.

Taiyo Yuden Inc. (Philippines)

A Japanese company, one of the leading manufacturer of SMD electronics components such as microchip inductors, multilayer capacitor chips and piezoelectric transducers.  MACTAN EXPORT PROCESSING ZONE, LAPU-LAPU CITY CEBU, PHILIPPINES

Team-Leader (Oct 2008 – July 2010)

JOB FUNCTION

• Prepare preventive maintenance scheduling
• Responsible for Daily machine status update and reports
• Monitor and provide daily activities to subordinates
• Supervise and Support machine installation and set up
• Monitoring of production yield and provide prompt action on critical areas as needed
• Training new technician how to approach machine trouble shooting using EFMEA.
• Responsible for process monitoring, abnormality of flow conduct root cause analysis
• Mentor and train newly hired technician and operator on safety and Quality.

Electro-mechanical Technician (July 2001 – 2008)

JOB FUNCTION

• Responsible for repair and maintenance of machines on the assigned area
• Documentation of machine repairs, parts replacement and corrective action
• Performs line set ups, troubleshooting, corrective and preventive maintenance of production machines
• Practice EFMEA on any non-conformance observed on production line

Investigate and analyze before action

• Using 5why analysis in finding ROOT CAUSE to machine related problem.
• Practice DMEA in parts modification for improvements by following root cause solutions.
• Responsible for installation and evaluation of newly acquired machines
• Purpose possible machine improvement for efficiency, safety, quality or cost reduction
• Design and localized fabrication of defective parts if applicable
• Maintain cleanliness and safety on the production line.
• Support other production line if needed or other responsibility assigned by superior

SMC PNEUMATIC (PHILIPPINES)

One of the world’s leading manufacturer of pneumatic and hydraulic equipment such as actuators, hydraulic valves flow control and pressure switch among others.

Warehousemen/project technician (Nov 2000 – Mar 2001)

JOB FUNCTION

• Assist in preparation of invoice and delivery
• Periodic inventory of actual stocks against the systems, making it always up to date.
• Performs product conversion, assembly and disassembly of components as per customer’s request.
• Support project dept. on project implementation as needed
• Submit proposals and solutions of proto-type project in the group

TRAINING AND SEMINARS ATTENDED:

Workplace Safety and Health (WSH)

Safety committee training course

Singapore Institute of safety Officers

August 2011

Lean Leader Training Level 1

Baker Hughes Inc. Baker oil tools (BOT)

273 Jalan Ahmad Ibrahim Singapore 629150

MAY 2011

Basic leadership workshop

Taiyo Yuden Phils. Inc.

MEZ 1 lapu-lapu city Cebu 6015

December 2008

Electrical & Instrumentation Control System

Sayson systems and technology

Unit H10, One Acacia Bldg. archbishop Reyes Cebu, Philippines

March 2011

Quad log Safety PLC programming

Sayson systems and technology

Unit H10, One Acacia Bldg. archbishop Reyes Cebu, Philippines

May 2011

Failure Mode Effect analysis (FMEA)

Taiyo Yuden Phils. Inc.

MEPZ 1, lapu-lapu city, Philippines

December 2002

EDUCATIONAL ATTAINMENT:

COLLEGE:    Cebu Institute of Technology (CIT)

Degree IN:  BS Electronics Communication Engineer (ECE –ETEEAP)

                     June 2017 – Pending upon my final thesis

COLLEGE:   MINDANAO STATE UNIVERSITY ILIGAN INSTITUTE OF TECHNOLOGY (MSU-IIT)

DIPLOMA:  INDUSTRIAL AUTOMATION AND CONTROL ENGINEERING TECHNOLOGY (IACET)

                     JUNE 1998 – MARCH 2001

Reference:

Engr. Roger Cuadra

Department Manager

Systems Engineering Department

Taiyo Yuden Inc. Philippines

+63 032 340 0574

Engr. Rammel Thomas Casona

Section Manager

Taiyo Yuden Phils. Inc.

Mezp 1. Lapu-lapu city, Philippines

+63 0915 547 7482

Engr. Rosito Untal (Mentor)

Tech-GEN Legacy /autotrak/TFC (INTeQ)

Baker Hughes Inc. Singapore

273 Jalan Ahmad Ibrahim Singapore 629150

rosito.untal@bakerhughes.com

Cheng LI Huay

Team Leader Probe (INTeQ)

Baker Hughes Inc. Singapore

273 Jalan Ahmad Ibrahim Singapore 629150

chengli.huay@bakerhughes.com

Tan Wah Hoo

Sn. Supervisor (Baker Oil Tools)

Baker Hughes Inc. GE Singapore

273 Jalan Ahmad Ibrahim Singapore 629150

wahhoo.tan@bakerhughes.com